Web Content Display Web Content Display

Remote Access & Wireless Services

Web Content Display Web Content Display

NPS CloudLab

NPS CloudLab is the best method to access a wide variety of popular applications and web services via Windows virtual desktop. NPS CloudLab only requires a web browser and an internet connection.

Using NPS CloudLab you will be able to access various internal websites/applications including, but not limited to, NPS Intranet, Matlab, Python, SharePoint, Student Muster, and Course Evaluation Forms (CEFs) previously known as Student Opinion Forms (SOFs).

To use NPS CloudLab:

Visit https://cloudlab.nps.edu
Select CloudLab HTML Access for online virtual desktop OR
Select Install CloudLab Client to download VMware client (Windows or Mac) or mobile application (iOS, Android)
Enter your NPS "User Name" and "Password" then click "Login"

These applications and services are delivered instantly to users via any computer or mobile device connected to a network at any location on or off campus.

Web Content Display Web Content Display

Virtual Private Network

A Virtual Private Network (VPN) creates a secure connection to the NPS internal network.

NPS supports connections from the Palo Alto Networks GlobalProtect (SSL) VPN client, and from the GlobalProtect VPN (IPSec) client. GlobalProtect uses Duo Security's two-factor authentication to connect.

Either client will allow you to:

• Access internal websites/applications including, but not limited to, the Intranet, Python, Student Muster, and Course Evaluation Forms (CEFs).

• Map network drives (including your "H" drive).

• Remote desktop over to computers located on campus.

Since your remote computer will be connected to the NPS network, it must meet our security requirements. Operating system security patches must be applied, and anti-virus software must be installed and kept up to date.

The Palo Alto Networks GlobalProtect client allows you to connect your home computer to the NPS network. Many handheld devices, including the iPad and iPhone, have native support for the GlobalProtect VPN (IPSec) Client. Below are the pages to instructions and information regarding Duo and GlobalProtect (SSL and IPSec). NPS Login is required to access these pages.

Duo Security Two Factor Authentication

GlobalProtect VPN

Web Content Display Web Content Display

Wireless Services

NPS Wireless

To set up access to the NPS Wireless network, please use the NPS Wireless account instructions (log-in required).

NPS Guest

To set up access to the NPS Guest Wireless network, please follow the Guest Wireless account instructions. Guest wireless accounts are valid for two weeks. If guests require a guest wireless account for longer than two weeks, they will need to apply for a new guest wireless account following these instructions.

eduroam

As a participating institution of eduroam, NPS faculty, staff, and students can connect to eduroam’s secure wireless networks at other participating institutions in the United States and abroad using their NPS email address and password.

Since this participation is reciprocal in nature, visiting faculty, staff, and students from eduroam participating institutions may also use their home institution login information on the NPS campus by selecting the "eduroam" SSID in the list of available wireless networks shown on their devices.

For more information on the eduroam service, please refer to the eduroam website.

Web Content Display Web Content Display

Additional Resources

E-mail Access

Outlook Web Access on Office 365 is viewable through any web browser at https://mail365.nps.edu
Setup instructions for downloading your e-mail to your computer can be found at wiki.nps.edu/tac. (Authentication required)

Direct Intranet Access

The NPS Intranet Homepage is accessible on campus or while connected to the VPN.

Department of Defense Root Certificate Install

The SSL certificates we use are issued by the Department of Defense. If your web browser does not trust these certificates, you'll get a warning when visiting the page.

OPTION 1 - Download and install ALL DOD root certificates (Windows Only)

This DOD-issued application will install the DOD root certificates into your IE or Firefox/Chrome web browsers. This application is is an MSI installer that should run on most workstations. An additional installer is available for those without admin rights.

How to determine if you are using a 64-bit or 32-bit version of Windows

32-bit Installer - (MSI Download)
64-bit Installer - (MSI Download)
Non Administrator - (MSI Download - use only if you do not have administrator rights)

Launch InstallRoot with administrative privileges by right-clicking on the program and select Run as Administrator or, if InstallRoot is already open, select Restart as Administrator from the InstallRoot Home tab.
You can ignore and close any messages about TAMP updates.
Enable NSS store if prompted to install certificates for Firefox browsers.
Select Install Certificates from the Home tab.

OPTION 2 - Download and install the DOD Root Certificates (Windows, Mac, Linux)

By importing and trusting the root DOD certificates you will be able to use any DOD website without receiving an SSL certificate warning. You will need to manually import the certificate into your browser or other application. Click here to go the download page at the DISA.MIL site, and click on the Trust Store tab.